JITEXING 316L Stainless Steel Turbocharger Gas Fuel Saver Intake Modified Throttle Air Filter for Gasoline Diesel Engines (80-85 mm)

Price: $39.99
(as of Mar 23,2022 05:45:11 UTC – Details)

Installation Notes Before installation, turn off the vehicle and disconnect the battery negative (black line). Role: speed up sensor identification (intake value adjustment), speed up the effect. Intake pipe installation: A. Install the hose connected to the throttle valve (if the size is appropriate), the throttle valve depth is 5CM, or put the product into half (2CM) into the throttle iron port, and then open the middle ring U-shaped card to fix. B. If the length of the pipe reaches 20CM and above, install two and the other one is installed in the air filter port or the intake hose (behind the sensor). C. If the intake pipe is long and straight (more than 20 CM), one of the throttle and air filter needs to be installed. If only one is installed, please install it at the throttle end. Large displacement and automatic transmission can be installed in the exhaust pipe three-way catalysis and muffler, the effect is more perfect. D. The installation position varies with the vehicle. The installed turbine must be parallel to the inner wall of the pipe. If the angle is generated or the hose bend is too large, the air intake effect will be affected. Please pay attention to the installation of the front and the back. After installation, turn on the battery negative pole, wait 3-5 minutes, then turn the key to the ON position to energize (but do not ignite the vehicle), let the driving computer slightly recognize. Wait for another 3-5 minutes, turn the key to the START position, start the car, and slowly step the throttle to the air, so that the speed gradually rises to 2000-3000 rpm, and the operation is 2-3 minutes. As long as there is no abnormality after installation, please go on the road to test, speed up the identification, test drive experience. Package Included: 1pcs Turbocharger Fuel Saver
Saving fuel 15%-25% is saving 15%-25% money. Note: When installing, do not affect the exhaust pipe work.This product is suitable for various gasoline (diesel) engines, such as cars, trucks, and SUVs…High quality 316L stainless steel, good material, will not damage the vehicle. Improve the climbing power, solve the slow start, reduce fuel consumption and reduce carbon emissions.
It is recommended not to place an order with a size of 41-46mm by default (the parts are small and easy to return), please choose the appropriate size to buy! The unit is mm, the range can be adjusted 1-5mm (0.04-0.2 inch), such as measuring inner diameter 69.95mm (about 2.8 inch), using Φ 67-72mm (2.64-2.83 inch) products. Pinch it to the minimum and tuck it in the right direction to make it.Automatically pops up against the wall of the tube,and will not loose and fall off.
Intake installation: The arrow on the outer ring of the turbine points to the engine. (Poor anti-effect or no effect); Exhaust installation: The arrow on the outer ring of the turbine points to the exhaust port. (Poor anti-effect or no effect); Air intake and exhaust air flow direction of the car: external air → air filter box → intake pipe → throttle valve → engine → exhaust pipe. When installing, wear protective gloves to avoid scratching your hands.
Using the powerful suction of the engine itself, the cyclone vortex can be quickly pushed into the cylinder through power generator airflow, increasing the instantaneous intake pressure and air oxygen content, achieving complete combustion, increasing the air-fuel ratio, and increasing the maximum fuel ratio by 25%. Adding it, does not change the engine and car structure, does not harm the engine, does not damage the original car oil circuit and other accessories, will not cause any pollution.
Please pay attention to the displacement model: 1.6L / 1.8L / 2.0L normal diameter 59-54mm; Japanese and German series: 2.5L four-cylinder commonly used specifications 60-65mm; 2.5L six-cylinder commonly used specifications 67-72mm; 3.0L-4.0L with conventional format 73-78mm Korean car 2.0L commonly used specifications 60-65mm, 1.4 The following common specifications 41-46mm / 48-53mm The above as a reference, when installed, the best measurement of air filter inlet pipe diameter shall prevail.